DYO - Elm kiln dried board, about 3" thick, 2 of 2
L:1230mm Avge W:400mm
Board Details
A thicker board than usual, ideal for making a chunky table or vanity unit top. One of two boards cut from the same log, they could be joined together to make a wider table or desk top. Please email if you would like further details on this option.
The pictures below show the unfinished board in our workshop. Its appearance will be completely transformed after processing to reveal the beautiful grain patterns.
The price shown is for a completely finished board:
- Planed flat on one or both sides depending on intended use
- Front face sanded through various grades of sandpaper to achieve a super smooth surface
- Reverse face / underside coarse sanded
- Live edges and board ends sanded smooth and corners lightly rounded over
- Placement of recessed inserts and stainless steel socket bolts for leg attachment
- Your choice of OSMO protective finish applied, raw, matt, satin or gloss hardwax oil
- Table assembly
Description
- Live edge elm board, one of a pair (priced separately)
- Ideal for a coffee table or bathroom vanity unit top
- Can be cut lengthways to make chunky live edge shelves
- Can be joined with DYO-KD-STJ-ELM107-1 to make a wider table
Unfinished Dimensions (mm)
- Length - 1230
- Top width - 430
- Middle width - 400
- Bottom width - 380
- Thickness - 72
Planing the board flat may reduce the stated depth of the board by up to 15mm.
Seasoning state
Kiln-dried, 8-10% moisture content. 3 years air-drying prior to kilning.
Tree Location
This board was milled from a tree that fell in St Johns in 2017.
Careful measurements are taken to minimise the amount of wood 'lost' when cutting a live edge board to make square sides and corners to square. If you want to do this then we will email you a picture showing the amount of wood that would be removed and the revised dimensions of the board.
The board won't be cut until we receive confirmation from you that you are happy to proceed.
Square ends only e.g. to place a shelf in an alcove - £25.00
One square side eg. to place a desk or table against a wall - £25.00
Cross cutting to length - £10
Rip Cutting down the length e.g. to make a river table - £25.00